Panel hardware and fasteners for switchgear and control panels
Everything a switchgear or control panel maker buys in, from the door lock to the earthing stud, from one supplier. Here is where each part goes, what to specify and how we support panel shops.
What a panel shop buys from us
Typical parts for LT switchboards, MCC and PCC panels, control desks and marshalling kiosks.
| Where it goes | Part | What to specify | See range |
|---|---|---|---|
| Main doors | Swing handle locks with rod control | Door height, number of locking points, padlock for lock-out, key or tool insert, IP rating | Plane locks · Rod control |
| Small doors, covers, cable chambers | Quarter-turn cam locks | Panel thickness, grip, insert (key, triangle, slot, knob), compression if sealing | Cam locks |
| Door hanging | Concealed, lift-off or heavy-duty hinges | Door weight, opening angle, left or right hand, lift-off for maintenance | Hinges |
| Door and cover sealing | Sponge gaskets, edge protection | IP rating needed, gap to fill, indoor or outdoor | Sealing strips |
| Removable covers, test boxes | Draw latches, handles | Pull-in force, padlockable, steel or stainless | Hasps and latches · Handles |
| Mounting plates, gland plates, busbar supports | Self-clinching nuts and studs | Thread, sheet thickness (often 1.5 to 3 mm CRCA), steel or stainless | Clinch nuts · Studs |
| Earthing points | Grounding standoffs and studs | Thread, bare metal contact, location on door and frame | Grounding standoffs |
| Frames, profiles, DIN rail mounting | Rivet nuts | Thread, wall thickness, open or closed end | Rivet nuts |
| 19-inch racks and swing frames | Cage nuts and clip nuts | Square hole size and panel thickness | Cage nuts · Clip nuts |
| Busbars, cable lugs, frame assembly | High-tensile and stainless bolts, SEMS screws | Size, grade (8.8, A2, A4), finish, washer type | Hex bolts · Fasteners |
From your panel drawing to a kit on the shop floor
Send your drawing or BOM
Door sizes, panel thickness, IP rating and the parts you use today, with part numbers if you have them.
We match every part
Our team proposes a matching series for each item, with drawings, so your design team can check fit.
Samples and approval
Samples for a trial panel, so your quality team can approve them before the first order.
Regular supply
Scheduled deliveries against your production plan, packed by part or as a kit per panel model.
Good to know
Can you match the locks and hinges we use now?
Usually yes. Send the current part number, a photo or a drawing and we will propose an equivalent with its drawing, so you can check cut-outs and fixing holes before you change.
Which IP rating can your door hardware reach?
That depends on the whole door: lock, hinges, gasket and cut-out together. Tell us the rating you need and we will recommend sealed locks and the right gasket profile for it.
Can you supply padlockable handles for lock-out?
Yes. Several swing handle and cam lock series take a padlock, so the panel can be locked out during maintenance.
Do you supply the fasteners too?
Yes. Clinch nuts and studs, rivet nuts, cage nuts, SEMS screws and high-tensile and stainless bolts come from our Fastening Systems division, so one order covers the whole panel.
Building switchgear or control panels?
Send us your panel drawing or bill of materials. We will reply with matching parts, drawings and prices.