Flush Head Pins
Self-Clinching & Weld Fasteners

Flush Head Pins

Unthreaded locating pins with a flush head, 3 to 6 mm.

Section
Self-clinching
Type
Studs & pins
Request a quote All self-clinching

Overview

Flush head pins press into thin sheet to give a permanent, accurately placed pin with a flush back. Use them as locating, hinge or pivot pins.

Full dimensions, preferred lengths and installation / push-out / torque-out performance data are in the tables below, taken from the self-clinching fasteners catalogue.

Specifications

Part numbersSG-TP, SG-TPS, SG-TP4
Zinc Plated SteelSG-TP
Stainless SteelSG-TPS
400 Series Stainless SteelSG-TP4
SizesØ3 mm, Ø4 mm, Ø5 mm, Ø6 mm
Sheet hardness (SG-TP)HRB 80 or less

Dimensions & performance data

All dimensions in mm unless stated. Values from the self-clinching fasteners catalogue. Install into sheet within the hardness limits shown in the specifications.

Dimensions (mm)

Pin diameter d ±0.053456
Min. sheet thickness1.0
Recommended hole size3.54.55.56.5
D ±0.45.206.127.198.13
H max.2.292.292.292.29
Min. distance to edge of sheet6.47.17.617.9

Preferred lengths L ±0.4 (mm)

Length L3456
3•
4•
6••
8•••
10••••
12••••
16••••
20•••

Performance data: SG-TP (test sheet: steel)

Pin diameter3456
Installation (kN)23273540
Pushout (kN)11.61.82.2

Key features

  • Flush back face
  • Accurate pin location
  • Permanent installation

Applications

Hinges and pivotsPanel locationJigsEnclosures
Need a size, grade or finish not listed?We also supply special and non-standard parts to drawing.Send enquiry

More self-clinching